How to clean the internal dirt of the oil press after use?

How to clean the internal dirt of the oil press after use? In the use of the machine or after use, if you do not pay attention to maintenance and maintenance, it will cause great damage to the machine. If the dirt is not removed in time, it will have a great impact on the machine. So how should we solve the dirt problem of the oil press?
If we use the oil press frequently, we can guarantee cleaning once a month. If it is used for a short time, you can simply clean it after use. If it is not used for a long time, the whole machine needs to be cleaned carefully when it is used for the last time.

Disassembly of parts

We need to turn off the power and remove the oil box and the residue box from the bottom of the machine. Wear anti-scalding gloves with both hands. Remove the hopper, press chamber insert and safety cover. Hold the press chamber with one hand and With one hand, loosen the locking ring in a counterclockwise direction, and gently pull the squeeze out.

Screw cleaning

Turn on the power, let the machine stand by and press and hold the reversing key, wrap the screw with a clean cloth and wipe it repeatedly until the grease is completely wiped off. Then use a wooden stick to clean up the residue in the press chamber.

Press chamber cleaning

After the residue in the press chamber is cleared, take it to the faucet to rinse and use a brush to clean the inside and out of the press chamber. Then, clean the filter parts, the residue box, the oil box, the oil guard, the hopper, and the crusher. The slag container and other parts shall be cleaned and wiped clean one by one, installed and stored in a cool and ventilated environment.
The above is the simple cleaning of the oil press, this method can clean most of the oil press. Simple cleaning can not only extend the life of the machine, but also make the squeezed oil healthier.