What are the reasons for the oil press not working?

Many friends may have encountered the situation that the oil press does not work, that is, when the power is turned on, the oil press has no response when pressing the start button. There are many reasons for this failure, and it is necessary to learn to eliminate the failure so as not to delay the normal production of the oil mill. In the process of using the oil press, the operator must also learn to analyze and eliminate the fault. Generally, there are several reasons why the oil press does not work:

1: The current is blocked or the motor is short. The processing method is very simple, that is, check the current and phase. Many people use an electric pen to measure, and can't find any faults. The correct one should be to use a multimeter to accurately measure whether the motor is out of phase.

2: The belt is loose. If the belt of the oil press is loose, it will not be able to pull the machine. It is like there is nowhere to use the force. The solution is to adjust the belt.

3: The control box motor is damaged, the solution is to cut off the power supply and replace the motor accessories.

4: The main shaft key falls off. The main shaft and the gearbox are driven by the combination of the key and the keyway. If the main shaft key is separated from the keyway, the main shaft of the oil press will not work. The solution is to pull out the main shaft for inspection and insert the key into the keyway.

5: Hard objects enter the raw materials. If the oil press is working, hard stones, metals and other sundries will be stuck in the press chamber. The solution is to open the lower plate of the silo and press the reverse switch to pour out the oil and sundries.

6: If the temperature of the pressing chamber is too low, the working factor of the oil press is the temperature, especially in winter, if the temperature of the pressing chamber is too low, it cannot be opened. It is necessary to turn on the electric heating system on the oil press to increase the temperature of the press chamber.

The above is the knowledge we have told you about DODOBO. I hope it can help you. We look forward to cooperating with you!

More News>>