How to deal with the blockage of the oil press

An oil press is a machine that squeezes oil out of oil with the help of external mechanical force. The oil press is blocked due to improper operation, so what causes the blockage of the oil press?

The screen cloth oil goes on one side; if the screen surface is not horizontal, the length of the left and right booms should be adjusted to make them equal; if the screen body is twisted, the eccentric shaft can be adjusted to make it vertical to the frame. If the oil material on the stone-removing screen surface goes unilaterally, the frame can be adjusted to make it level. If the air flow is uneven, the air regulating plate of the bellows can be adjusted to make the air flow evenly to the screen surface. If the screen net rate is low, the brush should be replaced with a new one or the length of the brush should be adjusted, and the inclination angle of the flat screen should be adjusted at the same time.
      The belt does not lift the oil when oil is applied; the main reason is that the lower part of the conveyor of the bucket elevator accumulates too much oil, which causes blockage. The plate door at the lower part of the conveyor can be opened to remove the accumulated oil.

The elimination method is that if there is oil between the rolls when starting, loosen the adjustment bolts of the rolls to remove the oil between the rolls. If the thickness of the blank is uneven, the roll gap should be readjusted and the loose nuts should be tightened.
Dongdubao oil press mainly produces oil press series, oil filter series, roasting machine and other series of products. The products are exported to all parts of the country and have a good reputation in the industry!